Product Description
Fitment for these Transmissions:
ST-1503 Stator Shaft Teflon Seal Installer/Resizer:
GM - 700-R4
GM - 4L60
GM - 4L60E
GM - 4L65E
GM - 4L70E
J-36418-C Turbine Shaft Teflon Seal Installer/Resizer:
GM - 700-R4
GM - 4L60
GM - 4L60E
GM - 4L65E
4L70L 1982 - Up

Specification:
Material: Aluminum Alloy
Color: Silver Tone
J-36418-C Turbine Shaft Seal Installer Resizer Size: 45x82mm/1.77"x3.23" (D*H); 56x50mm/2.2"x1.97" (D*H)
ST-1503 Stator Shaft Seal Installer Resizer Size: 20x100mm/0.79"x3.94"(D*H); 32x70mm/1.26"x2.76" (D*H)

Feature:
Material: Made of good quality aluminum alloy material which is strong strength, anti-rust and durable to use.
Easy Installation : Direct replacement ST-1503 stator shaft seal installer resizer is alternative for Atec Trans Tool T-1503. J-36418-C turbine shaft seal installer resizer is a good substitution for Kent-Moore J-36418-C, for Atec Trans-Tool T-1574, T-1574-Long and T-1574-M.

Package Included:
2 x J-36418-C Turbine Shaft Seal Installer Resizer
2 x ST-1503 Stator Shaft Seal Installer Resizer

Please kindly check the item description and photos to make sure it suitable for you before ordering.

Specification:
Thread: M18 X 1.5
Color: As the pictures shown
Material: 304 Stainless Steel
Fitment Type: Direct Replacement
Surface Finished: Chrome

Features:
CEL eliminator (someone calls it Mini cat).
The general model is suitable for most automobiles.
Built-in M18X1.5 catalytic converter, helps to get rid of checking engine lights.
DESIGN TO FIT MOST VEHICLES WITH THE M18X1.5 O2 SENSOR HOLE. OVER 99% SUCCESS RATE EVEN ON - EXOTIC CARS AND EURO CARS.
Built-in micros catalytic converter, avoid checking engine lights after modifying exhaustion or removing catalytic converter.
This O2 cel fix with a miniature cat will trick your ECU into thinking the stock catalytic converter is still installed. When you remove your catalytic converter, your post O2 sensor will see higher temperatures and greater flows of unburnt fuel.
As a result, this will throw check engine lights (Cel, SES, DTC) typically the error codes will be P0420 (System - Efficiency Below Threshold Bank 1) and/or P0430 P0420 - System Efficiency Below Threshold Bank 2). But for OFF ROAD use only!!!

Package Included:
1 x O2 Sensor Adapter

Notes:
Manual measuring, please allow 1 ~ 5 mm error, thank you.
Due to the difference between different monitors, the picture may not reflect the actual color of the item. We guarantee the style is the same as shown in the pictures. Please understand, thank you!
CEL eliminator (someone calls it Mini cat).
The general model is suitable for most automobiles.
Built-in M18X1.5 catalytic converter, helps to get rid of checking engine lights.
DESIGN TO FIT MOST VEHICLES WITH THE M18X1.5 O2 SENSOR HOLE. OVER 99% SUCCESS RATE EVEN ON - EXOTIC CARS AND EURO CARS.
CEL eliminator (someone calls it Mini cat).
The general model is suitable for most automobiles. Built-in M18X1.5 catalytic converter, helps to get rid of checking engine lights.
DESIGN TO FIT MOST VEHICLES WITH THE M18X1.5 O2 SENSOR HOLE. OVER 99% SUCCESS RATE EVEN ON - EXOTIC CARS AND EURO CARS. Built-in micros catalytic converter, avoid checking engine lights after modifying exhaustion or removing catalytic converter.
This O2 cel fix with a miniature cat will trick your ECU into thinking the stock catalytic converter is still installed. When you remove your catalytic converter, your post O2 sensor will see higher temperatures and greater flows of unburnt fuel.
As a result, this will throw check engine lights (Cel, SES, DTC) typically the error codes will be P0420 (System - Efficiency Below Threshold Bank 1) and/or P0430 P0420 - System Efficiency Below Threshold Bank 2). But for OFF ROAD use only!!!

Feature:
This vise-mounted tool will form a perfect bead on the end of aluminum or copper tubing. Simply insert the end of the tubing between the dies and start cranking the turning handle. Give the wheel a quarter-turn with each full rotation of the tubing to gradually tighten the dies against the tubing.

-Aluminum, steel or stainless steel Intake pipe
-Aluminum, steel or stainless steel Intercooler pipe
-Other custom pipes

Package Include:
1 Set Intake Intercooler Piping Kit
Shown as the pictures

Fitment:
Fits 5/8" and larger tubing
Fits Aluminum pipe: diameter from 5/8"(16mm) to 4"(102mm),max thickness 3mm;
Fits Steel pipe: diameter from 5/8"(16mm) to 4"(102mm),max thickness 1mm

 

Description:
Direct Replacement.

Installation Instruction is NOT Included
Strict quality control standards to Build and test.
Features a Black Anodized Finish
Made from High-Quality Aluminum alloy.

Manufacturer Part Number :	BW834652TH
Placement on Vehicle :	Left/Right/Front/Rear
Warranty :	1 Year
Fitment :	For Universal DIY Tool
Features :	Easy Installation
Type :	Intake Intercooler Piping Kit
Color :	Black
Model :	Beader Tool
Surface Finish :	Anodized
Size :	Fit for 5/8"
Material :	Aluminum

Description:
【Widely Used】Fit for hydraulic cylinders on most farm and construction equipment, Case 480E/580/580D/580 SE/580 ck/180 Backhoe, Case 1150h dozer, Bobcat cylinders, Hyd Cyl and etc.
【1266 Adjustable Gland Nut Wrench】Offers customized fit to the gland nuts from 2 inches to 6 inches diameter; Reversible to fit 1/4 inch and 5/16 inch diameter pinholes (Similar to OTC 1266).
【7463 Small Universal Gland Wrench】Fit to the gland nuts from 1” to 3-3/4” diameter; Reversible to fit 1/4 inch and 7/32 inch diameter pinholes(Similar to OTC 7463).
【High Quality】Hydraulic Cylinders wrench is CNC machined, high quality steel and black finish for strong durable finish, this tool kit ensures high strength, great tolerance and resistance to corrosion and rust, and features its durable construction and versatility.
【Easy to Use】 Made an adjustment to the Gland Nut Wrench to fit the pinholes and then simply used with 1/2" drive ratchet(for 7463), 3/4 inch square drive(for 1266) and breaker bar to loose and remove gland nut.



Specifications:
Condition:100% Brand New
Warranty:90 Day
Free return:30 Day
Color: Black
Size: As Picture Shown
Material: Alloy Steel
Head Style:Fixed Square
Replaces Part Numbers:1266 & 7463



1266 Adjustable Gland Nut Wrench:
Fits to gland nut from 2"-6" in diameter.
Reversed to fit 1/4" or 5/16" in diameter pinholes.
Use with 3/4" drive ratchet.
Fit hydraulic cylinders on most farm and construction equipment,
Case 480E/580/580D/580 SE/580 ck/180 Backhoe,
Case 1150h dozer, Bobcat cylinders, Hyd Cyl etc.

7463 Small Adjustable Gland Nut Wrench
Fits to gland nut from 1" to 3-3/4" in diameter.
Reversed to fit 1/4" or 7/32" inch diameter pinholes.
Use with 1/2" drive ratchet.
Fit hydraulic cylinders on agricultural loaders, compact tractor loaders, and skid steer loaders.

Compatible：
For Case 580 Backhoe
For Case 580 ck Backhoe
For Case 580D Backhoe
For Case 580 SE backhoe
For Case 480E Backhoe
For Case 780 Backhoe
For Case 1150h dozer
For Bobcat cylinders, Hyd Cyl, and more



How to Use:
Use 1266 Adjustable Gland Nut Wrench:
Made an adjustment to the Gland Nut Wrench to fit the pinholes and then simply used with 3/4 inch square drive/breaker bar to lose and remove gland nut.
Use 7463 Adjustable Gland Nut Wrench:
Made an adjustment to the Gland Nut Wrench to fit the pinholes and then simply used with 1/2" drive ratchet/breaker bar to lose and remove gland nut, No longer need to pound on a stubborn gland nut in the risk of hurting your hands.
Prompt:
In the case of adjustable gland nut wrenches, the nut is often incredibly tightly screwed on packing retainers - this requires the user to really work at loosening it by applying grease and other tricks. Some users may tie their gland nut wrench to their truck's towline to pry open a stubborn hydraulic cylinder nut.



What You Get:
1 pc 1266 Adjustable Gland Nut Wrench
1 pc 7463 Adjustable Gland Nut Wrench (As Picture Shown)

Specification:
Material： Plastic
Color: black, white, green
Quantity：801Pcs/750Pcs/650Pcs
Scope of use: suitable for auto parts side skirts, bumpers, car fenders, hoods, door trim, interior trim, and various trim parts

Features:
1.24 sizes: The package includes 24 most popular sizes for Universal various models， such as Toyota Nissan Ford GM, etc. Equipped with 1 fastener remover, perfect for installing or removing car stereo, door panels, trim, and window trim system, it can solve your problem quickly.
2. Ergonomic design: with ultra-lightweight and easy-to-hold features that can effectively save the workload of various interior and exterior auto trims in the shortest time. This kit comes in a box, eliminating the need to find different fasteners.
3. Durable material: The trim removal tool and half car clips are made of durable nylon material for long-term use. The durable and durable structure will not break or crack easily during use.
4. Suitable for Automatic push clips are widely used for door panels, door trim clips, bumper clips, interior fittings, and splash guard grippers replacement. All necessary grippers are used for accurate replacement of old and damaged grips.

Packing including:
801 PCS/set/ or 750 PCS/set / or 650 PCS/set

Specification:
Thread: M18 X 1.5
Color: As the pictures shown
Material: 304 Stainless Steel
Fitment Type: Direct Replacement
Surface Finished: Chrome

Features:
CEL eliminator (someone calls it Mini cat).
The general model is suitable for most automobiles.
Built-in M18X1.5 catalytic converter, helps to get rid of checking engine lights.
DESIGN TO FIT MOST VEHICLES WITH THE M18X1.5 O2 SENSOR HOLE. OVER 99% SUCCESS RATE EVEN ON - EXOTIC CARS AND EURO CARS.
Built-in micros catalytic converter, avoid checking engine lights after modifying exhaustion or removing catalytic converter.
This O2 cel fix with a miniature cat will trick your ECU into thinking the stock catalytic converter is still installed. When you remove your catalytic converter, your post O2 sensor will see higher temperatures and greater flows of unburnt fuel.
As a result, this will throw check engine lights (Cel, SES, DTC) typically the error codes will be P0420 (System - Efficiency Below Threshold Bank 1) and/or P0430 P0420 - System Efficiency Below Threshold Bank 2). But for OFF ROAD use only!!!

Package Included:
1 x O2 Sensor Adapter

Notes:
Manual measuring, please allow 1 ~ 5 mm error, thank you.
Due to the difference between different monitors, the picture may not reflect the actual color of the item. We guarantee the style is the same as shown in the pictures. Please understand, thank you!
CEL eliminator (someone calls it Mini cat).
The general model is suitable for most automobiles.
Built-in M18X1.5 catalytic converter, helps to get rid of checking engine lights.
DESIGN TO FIT MOST VEHICLES WITH THE M18X1.5 O2 SENSOR HOLE. OVER 99% SUCCESS RATE EVEN ON - EXOTIC CARS AND EURO CARS.
CEL eliminator (someone calls it Mini cat).
The general model is suitable for most automobiles. Built-in M18X1.5 catalytic converter, helps to get rid of checking engine lights.
DESIGN TO FIT MOST VEHICLES WITH THE M18X1.5 O2 SENSOR HOLE. OVER 99% SUCCESS RATE EVEN ON - EXOTIC CARS AND EURO CARS. Built-in micros catalytic converter, avoid checking engine lights after modifying exhaustion or removing catalytic converter.
This O2 cel fix with a miniature cat will trick your ECU into thinking the stock catalytic converter is still installed. When you remove your catalytic converter, your post O2 sensor will see higher temperatures and greater flows of unburnt fuel.
As a result, this will throw check engine lights (Cel, SES, DTC) typically the error codes will be P0420 (System - Efficiency Below Threshold Bank 1) and/or P0430 P0420 - System Efficiency Below Threshold Bank 2). But for OFF ROAD use only!!!

Description:
Complete Kit - Includes everything you need for a hassle-free installation: 3 high-flow -10AN lines with 90° and 45° fittings, 8 fittings for a variety of connections, washers, and zip ties.
Superior Quality - Our high-strength nylon outer braid prevents expansion under high pressure and protects the line against abrasion, ensuring long-lasting durability.
Optimal Performance - Our high-flow -10AN lines and fittings ensure maximum flow while preventing leaks, giving you peace of mind and optimal performance.

Specification:
Color: Black
Weight: 3.6 lb
Package Size: 11.8*11.8*2.4 in

Fitment:
06-10：for 2006-2010 LLY/LBZ/LMM Duramax models for a seamless installation
01-05：for 2001-2005 GM 6.6L Duramax (LB7/LLY) Transmission Line Kit

Package Include:
06-10
3* Oil hoses
8* Hose ends
2* Gaskets
8* Rings

01-05
3* Oil hoses
12* Hose ends
2* Gaskets
10* Rings

DESCRIPTION:
Flexible SS Braided Transmission Cooler Hose Line Compatible with GM Chevy 1996-20214L80E Compatible with Turbo 350/400/200-200R4/700R4 4L60 4L60E 4L65E Compatible with Ford C4-C6-AOD

Feature:
Direct replacement for proper fit and function every time
According to original factory specifications, perfect match to original car.
Made of high quality material.
Easy to install.
Parts are from certified professional factory.
We highly value the buyer shopping experience and aimed to provide quality parts.
Cooler Hose Line Fitting for GM Chevy 1996 - 2021 4L80E, for Ford C4-C6-AOD Turbo 350/400 200-200R4

Advantage:
Stainless steel flexible braided transmission hoses/ lines;
Each 3/8" inner diameter hose is about 70" long with AN-6 inverted flare ends;
-6AN hoses with swivel ends: 7/16” O.D. & 3/8” I.D;
Sold as a pair (2 hoses).

FITMENT:
Compatible with Ford C4 - C6 - AOD
Compatible with Turbo 350 (Some are 1/4" NPT)
Compatible with Turbo 400
Compatible with Turbo 200 - 200R4
Ford C4-C6-AOD,Turbo 350/400/200-200R4/700R4 4L60 4L60E 4L65E,Stainless Steel Braided Lines -70 Inch
Compatible with Power Glide (Some are 1/4" NPT)
Compatible with 700R4 - 4L60 - 4L60E - 4L65E
Compatible with GM Chevy 1996 and Newer 4L80E

Package Includes:
8
(2) about 52 inch & 3/8" I.D. Stainless Steel Braided Hoses;
(4) AN-6 flared to 1/4" NPT billet adaptors;
(2) AN-6 flared to 3/8" NPT billet adaptors;
(4) 90 degree AN-6 inverted flare to AN-6 flare billet adaptors;
(2) Aluminum 4L80E adapter fittings.

10
(2) about 53 inch & 3/8" I.D. Stainless Steel Braided Hoses;
(4) AN-6 flared to 1/4" NPT billet adaptors;
(2) AN-6 flared to 3/8" NPT billet adaptors;
(4) 90 degree AN-6 inverted flare to AN-6 flare billet adaptors;
(2) Aluminum 4L80E adapter fittings.

12
(2) about 73 inch & 3/8" I.D. Stainless Steel Braided Hoses;
(4) AN-6 flared to 1/4" NPT billet adaptors;
(2) AN-6 flared to 3/8" NPT billet adaptors;
(4) 90 degree AN-6 inverted flare to AN-6 flare billet adaptors;
(2) Aluminum 4L80E adapter fittings.

Description:
Replacing or servicing a turbocharger can be a messy, risky business—and if you focus only on the turbo itself without checking the full system, your fix will only be temporary.
Fortunately, you can take a strategic approach to these high-risk repairs with our diverse array of critical turbocharger accessories. From intercooler hoses to V-band clamps, our superior components address known flaws in OE parts, covering almost every issue imaginable and literally millions of repair opportunities. There’s no better brand to have at hand as older turbocharged engines develop issues now and in the years to come.

Feature:
Ideal replacement - this intercooler hose matches the fit and function of the original equipment hose
Greater durability - this intercooler hose ends are made of stainless steel instead of the original equipment plastic to better withstand high temperatures
Complete repair solution - this intercooler hose includes new end clamps required to complete installation
Quality tested - this part has undergone try-on and material testing to ensure a quality fit and long service life

Fitment:
Ford F-250 Super Duty: 2011, 2012, 2013, 2014, 2015, 2016
Ford F-350 Super Duty: 2011, 2012, 2013, 2014, 2015, 2016
Ford F-450 Super Duty: 2011, 2012, 2013, 2014, 2015, 2016
Ford F-550 Super Duty: 2011, 2012, 2013, 2014, 2015, 2016

Package Include:
2* Cooling tube
2* Silicone hose
4* Clamps

Features:
TIG welded from high quality aluminium.
Cap is precision CNC from billet aluminum.
Cleanable and light weight with stylish appearance.
Direct replacement of OEM plastic bottle.

Specification:
Material: Aluminum alloy
Capacity: Approximate 2.5L
Color: Silver/Black
Package: 8.08*6.69*6.30in
Weight: 1.58lb

Fitment:
2002-2008 R52, R53 Mini Cooper S, Mini Cooper S Convertible

Package Include:
1* Radiator tank